Jazzmold-Injection Molding Machine-Specification

	» Feature		» Components
	» Specification		» Platen dimension
	» Machine & ejection dimension

Each Model has two types of components choice. Click components to check details from top menu.

	JMF-88T	JMF-128T	JMF-168T	JMF-218T
JMF-268T	JMF-308T	JMF-368T	JMF-468T	JMF-568T
JMF-650T	JMF-780T	JMF-1080T	JMF-1600T

Item		JMF-80T (Cancelled)			JMF-88T
	Unit				A	B	C
Injection Unit
Screw diameter	mm				35	37	40
Screw L/D ratio					20.6	19.5	18
Shot volume	cm3				123	137	160
Shot weight	g				110	123	145
	oz				3.9	4.3	5.1
Injection pressure	Mpa				193	173	148
Injection rate	g/s				88	100	115
Plasticizing capacity	g/s				14	16.8	19.2
Screw speed	rpm	220
Clamping Unit
Clamping force	KN				1000
Toggle stroke	mm				320
Space between tie bar	mm				365 x 365
Max. mold thickness	mm				380
Min. mold thickness	mm				150
Ejector stroke	mm				100
Ejector force	KN				27.5
Ejector number	Pcs				5
Ejector type		Hydaulic
General
Motor power	KW				11
Hydraulic pump pressure	Mpa				16
Oill Reservoir	Liter				170
Heating power	KW				5.8
Machine dimension	m				3.8 x 1.23 x 1.6
Machine weight	Ton				3.5

Item		JMF-128T			JMF-168T
	Unit	A	B	C	A	B	C
Injection Unit
Screw diameter	mm	37	40	43	40	45	48
Screw L/D ratio		21.1	19.6	18.2	22.5	20	18.8
Shot volume	cm3	172	201	232	270	342	389
Shot weight	g	154	181	209	243	308	350
	oz	5.43	6.38	7.37	8.57	10.9	12.4
Injection pressure	Mpa	196	168	145	201	159	140
Injection rate	g/s	112	130	150	122	139	155
Plasticizing capacity	g/s	15.7	20.4	23.6	22.8	31.7	35.7
Screw speed	rpm	220			180
Clamping Unit
Clamping force	KN	1280			1680
Toggle stroke	mm	365			425
Space between tie bar	mm	412 x 412			465 x 465
Max. mold thickness	mm	450			480
Min. mold thickness	mm	160			180
Ejector stroke	mm	130			130
Ejector force	KN	39.6			39.6
Ejector number	Pcs	5			5
Ejector type		Hydaulic
General
Motor power	KW	13			15
Hydraulic pump pressure	Mpa	16			16
Oill Reservoir	Liter	170			250
Heating power	KW	7.6			10
Machine dimension	m	4.5 x 1.23 x 1.7			5.4 x 1.38 x 2.0
Machine weight	Ton	4.0			5.5

Item		JMF-218T			JMF-268T
	Unit	A	B	C	A	B	C
Injection Unit
Screw diameter	mm	45	50	55	50	55	60
Screw L/D ratio		22.2	20	18.2	22.5	20.5	18.8
Shot volume	cm3	334	412	499	490	593	707
Shot weight	g	301	371	449	441	534	636
	oz	10.7	13.2	15.9	15.6	18.8	22.4
Injection pressure	Mpa	216	175	144	205	169	142
Injection rate	g/s	120	148	179	167	200	239
Plasticizing capacity	g/s	26.2	31.5	37.0	31.5	41.2	49
Screw speed	rpm	180
Clamping Unit
Clamping force	KN	2180			2680
Toggle stroke	mm	470			540
Space between tie bar	mm	515 x 515			570 x 570
Max. mold thickness	mm	530			600
Min. mold thickness	mm	200			220
Ejector stroke	mm	130			130
Ejector force	KN	62			62
Ejector number	Pcs	5			9
Ejector type		Hydaulic
General
Motor power	KW	18.5			22
Hydraulic pump pressure	Mpa	16			16
Oill Reservoir	Liter	350			510
Heating power	KW	11.65			14.7
Machine dimension	m	5.6 x 1.4 x 2.0			5.7 x 1.42 x 2.0
Machine weight	Ton	6.7			9

Item		JMF-308T			JMF-368T
	Unit	A	B	C	A	B	C
Injection Unit
Screw diameter	mm	60	65	70	65	70	75
Screw L/D ratio		21.7	20	18.6	22.4	20.6	19.2
Shot volume	cm3	727	853	989	1094	1269	1457
Shot weight	g	662	776	900	995	1154	1325
	oz	23.3	27.3	31.7	35	40.7	46.7
Injection pressure	Mpa	213	182	157	208	180	156
Injection rate	g/s	238	279	324	317	369	122
Plasticizing capacity	g/s	45.5	55.8	60.8	57.5	64.3	69.5
Screw speed	rpm	180
Clamping Unit
Clamping force	KN	3080			3680
Toggle stroke	mm	585			700
Space between tie bar	mm	645 x 645			725 x 705
Max. mold thickness	mm	650			750
Min. mold thickness	mm	250			250
Ejector stroke	mm	160			160
Ejector force	KN	70			110
Ejector number	Pcs	13			13
Ejector type		Hydaulic
General
Motor power	KW	30			37
Hydraulic pump pressure	Mpa	16			16
Oill Reservoir	Liter	600			825
Heating power	KW	17			19.65
Machine dimension	m	6.5 x 1.6 x 2.2			7.5 x 1.8 x 2.4
Machine weight	Ton	11			15

Item		JMF-468T			JMF-568T
	Unit	A	B	C	A	B	C	D
Injection Unit
Screw diameter	mm	75	80	84	75	84	90	100
Screw L/D ratio		21.4	20	19	23.6	21.1	19.7	17.7
Shot volume	cm3	1722	1959	2160	1808	2492	2861	3532
Shot weight	g	1567	1786	1966	1627	2242	2575	3197
	oz	55.3	62.9	69.4	56.1	77.3	88.8	109
Injection pressure	Mpa	177	156	141	205	163	142	115
Injection rate	g/s	426	485	535	416	522	600	740
Plasticizing capacity	g/s	59.8	68	79.8	56.3	77.9	89.4	110.4
Screw speed	rpm	160			120
Clamping Unit
Clamping force	KN	4680			5680
Toggle stroke	mm	750			850
Space between tie bar	mm	800 x 762			835 x 835
Max. mold thickness	mm	820			880
Min. mold thickness	mm	300			350
Ejector stroke	mm	200			250
Ejector force	KN	120			158
Ejector number	Pcs	13			17
Ejector type		Hydaulic
General
Motor power	KW	45			55
Hydraulic pump pressure	Mpa	16			16
Oill Reservoir	Liter	938			1200
Heating power	KW	23.65			34
Machine dimension	m	8.1 x 2.0 x 2.5			9.0 x 2.5 x 2.7
Machine weight	Ton	20			30

Item		JMF-650T				JMF-780T
	Unit	A	B	C	D	A	B	C	D
Injection Unit
Screw diameter	mm	80	90	100	110	90	100	110	120
Screw L/D ratio		24.8	22	19.8	18	24.5	22	20	18.3
Shot volume	cm3	2036	2576	3181	3849	2925	3611	4369	5200
Shot weight	g	1853	2344	2895	3503	2632	3250	3932	4680
	oz	65.4	82.7	102.1	123.6	91	113	137	163
Injection pressure	Mpa	224	177	143	118	228	184	152	128
Injection rate	g/s	428	541	668	808	542	669	809	963
Plasticizing capacity	g/s	56.7	71.8	88.6	107.3	71	88	107	127
Screw speed	rpm	120				120
Clamping Unit
Clamping force	KN	6500				7800
Toggle stroke	mm	900				985
Space between tie bar	mm	895 x 895				980 x 980
Max. mold thickness	mm	900				1000
Min. mold thickness	mm	400				400
Ejector stroke	mm	260				280
Ejector force	KN	175				186
Ejector number	Pcs	17				21
Ejector type		Hydaulic
General
Motor power	KW	30 + 30				37 + 37
Hydraulic pump pressure	Mpa	16				16
Oill Reservoir	Liter	1487				1800
Heating power	KW	46.45				58.45
Machine dimension	m	9.9 x 2.4 x 3.8				11.0 x 2.6 x 3.8
Machine weight	Ton	36				45

Item		JMF-1080T				JMF-1600T
	Unit	A	B	C	D	A	B	C	D
Injection Unit
Screw diameter	mm	100	110	120	130	120	130	140	150
Screw L/D ratio		24.3	22.1	20.2	18.7	26.1	24.1	22.4	20.9
Shot volume	cm3	3786	4581	5451	6398	6672	7831	9082	10426
Shot weight	g	3445	4168	4960	5822	6071	7126	8264	9487
	oz	121.5	147	175	205.4	214.1	251.4	291.5	334.6
Injection pressure	Mpa	211	174	146	125	193	164	142	123
Injection rate	g/s	660	800	951	1113	893	1048	1216	1395
Plasticizing capacity	g/s	88.3	100.8	120	140.8	125.8	147.6	171.2	196.5
Screw speed	rpm	110				99
Clamping Unit
Clamping force	KN	10800				16000
Toggle stroke	mm	1200				1600
Space between tie bar	mm	1100 x 1100				1500 x 1415
Max. mold thickness	mm	1200				1500
Min. mold thickness	mm	500				700
Ejector stroke	mm	320				350
Ejector force	KN	215				318
Ejector number	Pcs	21				29
Ejector type		Hydaulic
General
Motor power	KW	45 + 45				45 +45 +45
Hydraulic pump pressure	Mpa	16				16
Oill Reservoir	Liter	2306				2500
Heating power	KW	68.45				91.9
Machine dimension	m	11.9 x 2.8 x 4.0				14.4 x 3.5 x 4.2
Machine weight	Ton	56				100





		CHINA JAZZMOLD PLASTIC MACHINE & MOLD CO.(EXPORT DEPARTMENT)
		ADD: ROOM 1501, BaiZhang East Road 796, NINGBO 315040, CHINA
		TEL: +86-574-8789-4262 ; FAX: +86-574-8789-4242
		EMAIL: sales@jazzmold.net ; sales@jazzmold.com ;

Last Updated on Nov 9th, 2007 by JAZZMOLD